YIWU JINBAO HEATING PRODUCTS FACTORY

Favorite  |  Set Home
 +86-17059456950
Products > Heating Tube > Industry Heating Element > Industrial Heater Heating Element
Product name : Industrial Heater Heating Element
←[Previous Product]              [Next Product]→
Online Inquiry         Email Us

  Details:
Industrial Heater Heating Element
Immersion Electric Heater               

Introduction:
1. Due to its special design structure, industrial immersion heaters are widely used in air, water, oil, acid and alkaline liquids, and can be effectively adapted to various environments, such as air separation equipment, metallurgy , high temperature runners, medical equipment, environmental protection equipment, sewage treatment systems, heating systems, etc. 

2. This industrial electric heaters produced by Liangdong have sufficient bearing capacity and superior service life under strong use intensity and harsh environment

Raw material: 
        High quality MgO        (TATEHO,UCM,etc)

 Seamless stainless steel pipe   (Shougang group,Japan,etc )

      Import resistance wire    (Shougang gruop,SILVER,etc)

Basic parameter :
Product name  Industrial immersion heater 
Power 
0-90000KW(explosion-proof up to 2000KW)
Voltage  12V-1000V(customized )
Usage temperature  -200℃-+850℃
Thermal transforming  99.99%
Leakproof Structure
Thread, Flange, Chuck ,etc
Lift time  10000-60000H 
Useable medium
Gas/water/oil/fluid
 Installation instruction of immersion heater  :
Immersion heater basic selection table refer to the follows :
Oil fluid type  Model  Resistance  wire  Pipe material  MgO life time  Pipe load 
Commercial &Civil LDF-O(M) Shougang group Welding stainless steel China ≥7200H 0.7 w/cm²(still oil)

1.5 w/cm²(high quality oil)
2.4 w/cm²(conduction oil)
3.5 w/cm(fuel oil)
Economy type  LDF-O(C) Shougang group  304/321 seamless stainless steel  Japan (TATEHO) ≥20000H 0.7 w/cm²(still oil)
1.5 w/cm²(high quality oil)
2.4 w/cm²(conduction oil)
3.5 w/cm(fuel oil)
High performance LDF-O(H) Import  304 stainless steel  Japan (TATEHO) ≥50000H 0.7 w/cm²(still oil)
1.5 w/cm²(high quality oil)
2.4 w/cm²(conduction oil)
3.5 w/cm(fuel oil)

Parts of our different size flange mode slection table  as follows , more other sizes, please contact our customer services!
Flange  Pipe diameter (mm) Number of cores  Power (KW) load tye  Heat length (mm) Code 
DN100 12 6 4 Low load  590 L08D4004
Ultra-low load  1260 S08D4004
12 6 5 Low load  740 L08D4005
Ultra-low load  1580 S08D4005
12 6 6 Low load  880 L08D4006
12 6 15 High load  950 H08D4015
Middle load  1380 M08D4015
12 6 20 High load  1260 H08D4020
12 6 25 High load  1580 H08D4025
DN125 12 9 6 Low load  590 L09D4006
Ultra-low load  1260 S09D6006
16 6 6 Low load  660 L09D4008
Ultra-low load  1420 S09D6006
12 9 8 Low load  790 L09D4008
Ultra-low load  1690 S09D4008
16 6 8 low load  880 L09D6008
12 9 20 High load  840 H09D4020
Middle load  1230 M09D4020
16 6 20 High load  950 H09D6020
Middle load  1380 M09D6020
12 9 25 High load  1050 H09D4025
Middle load  1540 M09D4025
16 6 25 High load  1180 H09D6025
Middle load  1730 M09D6025

Different type of  heater structure chart : 
Comparison photos of heater with heat dissipation part and without heat dissipation part:
                    With heat dissipation  
 
                                    Without heat dissipation
 

Industrial explosion proof flange immersion electric heater

Industrial explosion proof flange immersion electric heater

Industrial explosion proof flange immersion electric heater

Industrial explosion proof flange immersion electric heater

description

Explosion-proof electric heater is an international overview of the popular high-quality long-life electric heating equipment. Internal control system based on electric heater output temperature sensor automatically adjusts the heater output signal power, the output of the media temperature uniformity.

When the heating element over-temperature, the heating element independent of the overheating protection device immediately cut off the heating power, to avoid caused by heating the material over-temperature coke, deterioration, carbonation, causes severe heating element burned out, effectively extending the service life of electric heater.

Explosion-proof electric heater works: proof electric heater is a fluid consumption converted to heat energy, heating the material to be heated on the need. Low-temperature fluids at work under pressure through a pipe into the input port, the use of thermodynamic principles of design of fluid path along the interior heating container for a specific runner, taking the work of electric components produced by thermal energy, so is heated the temperature rise, electric heaters, heat export process requirements are medium.

 

special advantage

1.Our heater has temperature sensor,which can test the heating element temperatuer and send signal to electric control panel.

 2.Our heater has overheating protector,use PT100  thermostat.If the heater temperatuer beyond setting temperatuer, it will stop power automatically.Once the temperature normal,it will start power automatically.This can avoild dry run and overheating operation to damage the heater.

features

1. Can be manufactured in stainless steel, Incoloy or titanium. 
2. Various wattages and voltages  available 
3. Various element diameters according to your need
4. Several flange sizes available 
5. Can be manufactured to different shapes 

6.We have high technolagy to make the bend radius very small,then the flange and tank also can use smaller size, then can save a lot cost.

7.With overheat protector, can adjust temperature automatically to avoid damage heater and heat mediums.

 

 

Detailed Description

 Thermal oil heater( electric thermal oil heater ) has advantages of stable heating performance, good heat transfer performance, low vapor pressure.As the heat-conducting oil possesses some advantages of good thermal stability, good heat-transfer performance, low vapor pressure, non-toxic, tasteless and non-corrosive on equipment, our  electric thermal oil heaterhas gradually been more extensive used in enterprise production. The characteristics of the system are following:

1.High-quality heat source;

2.Energy saving, low operating cost; 

3.Low investment of equipment;

4.Safety;

5.Environmental protection;

6.Widely application

Industrial Heater Heating Element


  Related Products :

Industrial Heater Heating Element
Industrial Heater Heating Element

Industrial Heater Heating Element
Industrial Heater Heating Element

Industrial Heater Heating Element
Industrial Heater Heating Element

Industrial Heater Heating Element
Industrial Heater Heating Element

Industrial Heater Heating Element
Industrial Heater Heating Element

titanium tube heater
titanium tube heater

Industrial immersion flange heater with thermostat
Industrial immersion flange heater with thermostat

Industrial Heater Heating Element
Industrial Heater Heating Element

Online service

Skype: live:borisyuecn 63859830 info@heatingelement.cc heatingelement@outlook.com

Wechat

008613456528940